Blue Bird M380 2003, Owner'S Manual

Page: 58 / 579

1-1 - Safety and Security - Security Features____________________________________________M380 Owner’s Manual
1-2-26 Rev. “F”
Door Priority is installed, this feature controls the driver’s door only, and the following feature will
control the automatic unlocking of the other doors.
Programming Unlock #1 When Ignition is Turned Off:
Follow Steps 1 through 4 in the second for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released nineteen times. The system’s response will be nineteen siren chirps, and the
Status Light flashing nineteen times, pausing, then repeating. Within 10 seconds, press and release
the transmitter’s large upper button to turn on “Unlock #1 When Ignition Turned Off” (the siren will
chirp once) or the small lower button to turn this feature off (the siren will chirp twice).
Feature #20 Unlock #2 When Ignition is Turned Off
(Factory Default Setting Off)
As explained for the previous feature, this feature controls the automatic unlocking of all doors except
the driver’s door if Driver’s Door Priority is installed.
Programming Unlock #2 When Ignition is Turned Off:
Follow Steps 1 through 4 in the second for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released twenty times. The system’s response will be twenty siren chirps, and the Status
Light flashing twenty times, pausing, then repeating. Within 10 seconds, press and release the
transmitter’s large upper button to turn on “Unlock #2 When Ignition Turned Off” (the siren will chirp
once) or the small lower button to turn this feature off (the siren will chirp twice).
Feature #21 Open Door Bypass Of Ignition Locking
(Factory Default Setting On)
This feature cancels the automatic locking or unlocking of the vehicle’s doors when the ignition switch
is turned on or off if one of the doors is open. This feature can be useful, for example, for leaving
others within a locked vehicle when only the driver exits the vehicle. Features #18, #19, or #20 must
be turned on for this feature to operate.
Programming Open Door Bypass Of Ignition Locking:
Follow Steps 1 through 4 in the second for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released twenty one times. The system’s response will be twenty-one siren chirps, and
the Status Light flashing twenty one times, pausing, then repeating. Within 10 seconds, press and
release the transmitter’s large upper button to turn on “Open Door Bypass Of Ignition Locking” (the
siren will chirp once) or the small lower button to turn this feature off (the siren will chirp twice).
Feature #22 1 or 2 Button Transmitter Operation
(Factory Default Setting 1 Button Operation)
This feature changes the configuration of how the transmitter operates the system. In the factory
default setting of “1 Button Operation”, a single transmitter button alternates Arming and Disarming
the system with every press of the button. When this feature is programmed to the “2 Button
Operation” one of the transmitter’s buttons will only Arm the system, and a second button will only
disarm the system. An optional transmitter with four buttons, Omega part number #105-05, is
available from your Crime Guard dealer or directly from Omega Research and Development. The
following pages will show the system’s operation with either type of transmitter.
Programming Transmitter 1 or 2 Button Operation
:
Follow Steps 1 through 4 in the second for Programming the 745i ³, at Step 4 the Valet Switch will be
pressed and released twenty two times. The system’s response will be twenty-two siren chirps, and
the Status Light flashing twenty two times, pausing, then repeating. Within 10 seconds, press and
release the transmitter’s large upper button to configure the system for “1 Button Operation” (the siren
will chirp once) or the small lower button to configure the system for “2 Button Operation” (the siren
will chirp twice).