Blue Bird M380 2003, Owner'S Manual

Page: 345 / 579

M380 Owner’s Manual________________Interior and Exterior Systems Operation – Video and Audio Equipment – 4-18
Rev. “G” 4-18-85
1. Connect the satellite antenna RG-6 coaxial cable to the DIRECT TV Receiver’s SATELLITE IN
jack.
2. Connect the DIRECT TV Receiver’s A/V jacks to the VCR and A/V receiver’s A/V jacks.
3. AUX, optical connection, and digital output connections - If your audio receiver has coaxial or
optical digital connectors, connect the appropriate type of cable to the DIRECT TV Receiver’s
DIGTAL AUDIO OUT for two-channel digital stereo. If your A/V receiver is also capable of decoding
Dolby Digital, use this connection in order to listen in full 5.1-channel surround sound. Additional
audio information begins in the Adjusting Audio and Video section later in this manual.
4. Connect the VCR’s A/V OUT jacks to a pair of the A/V receiver’s A/V In jacks.
5. Connect the A/V receiver’s MONITOR OUT jack to the TV’s VIDEO IN jack.
6. Plug the components into an electrical outlet.
NOTE: If you have connected a VCR to your entertainment system in a way that routes the
satellite receiver’s signal to your VCR before it reaches the TV. You may see a distorted picture
if you try to record a copy-protected program. A Can’t Tape symbol in the screen banner
identifies these programs. If this occurs, simply stop recording and the picture will
automatically correct itself.