Blue Bird M380 2003, Owner'S Manual

Page: 272 / 579

4-18 – Interior and Exterior Systems Operation – Video and Audio Equipment________________M380 Owner’s Manual
4-18-12 Rev. “G”
To select a preset using the settings menu:
1. Press or on the remote to select the FM or AM source.
2. Press . (Make sure your TV is on.)
3. Press ▼ and select .
4. Press ◄ / ► to step through the preset stations.
Changing FM Settings
Selection: FM setting options: What the setting affects:
Off
Timer not set.
mm:ss Sets timer to turn off when time (01:00 to 90:00 minutes)
expires.
Station: ----- Tunes to that station frequency.
Preset:
1 of 25
Tunes to the stored preset station.
FM Status:
selection Displays information about the FM source.
Makes RDS information appear in media center display
(in Europe only).
Makes RDS information unavailable on media center
display (in Europe only).
Output mode: Stereo Always plays the FM broadcast in stereo.
Mono Always plays the FM broadcast in mono.
Audio Setup: selection See Sound Adjustments
System Setup: selection See System Adjustments
Sleep Timer:
RDS Info: (Europe
only)
Changing AM Settings
Selection: AM setting options: What the setting affects:
Off Timer not set.
mm:ss Sets timer to turn off when time (01:00 to 90:00 minutes)
expires.
Station: ----- Tunes to that station frequency.
Preset: 1 of 25 Tunes to the stored preset station.
Available only if presets
include an AM station
AM Status:
selection
Displays information about the AM source.
Audio Setup: selection See Sound Adjustments
System Setup: selection See System Adjustments
Sleep Timer:
Playing Other Sources
Turn on any component connected to the media center by using the remote for that component or
controls on the component front panel.
Pressing
AUX , Video 1 or Video 2 on the 3-2-1 system remote turns on the system and selects the
audio for that component. Be sure a tape or disc is loaded, as needed.
Use the
Volume ▲ or ▼ buttons on the 3-2-1 remote control or media center to raise or lower the
volume of the system.
To control all other functions of that source, use its remote or front-panel controls. For details on what
changes you can make, refer to the owner’s manual that came with the component.