M380 Owner’s Manual________________________Interior and Exterior Systems Operation – Slide-Out Operation – 4-9
Rev. “F” 4-9-5
4-9.2.5 Normal Operation Procedure:
Table 4 - Room Motion – Extending Room
STEP CONDITION
1
Ensure the 120VAC circuit breaker, CB07, is turned On.
2
Ensure the 120VAC/12VDC power supply is active by viewing the Room Motion Switch
panel to see if at least the Doors LED & Level LED are lighted.
3
Parking Brake must be set.
4
Ignition switch in the ACCESSORY position. Accessory LED must be lighted.
5
Air LED is a status indication that the system air pressure is at least 80 psi. The air
seal requires at least 20 psi to inflate the air seal.
6
Doors & Level LEDs are always lighted. These status LEDs are not functional at this
time.
7
Depress OUT pushbutton until the Room Out and Air Seal LEDs are lighted.
Table 5 - Room Motion – Retracting Room
STEP CONDITION
1
Ensure the 120VAC circuit breaker, CB07, is turned On.
2
Ensure the 120VAC/12VDC power supply is active by viewing the Room Motion Switch
panel to see if at least the Doors LED & Level LED are lighted.
3
Parking Brake must be set.
4
Ignition switch in the ACCESSORY position. Accessory LED must be lighted.
5
Air LED is a status indication that the system air pressure is at least 80 psi. The air
seal requires at least 20 psi to inflate the air seal.
6
Doors & Level LEDs are always lighted. These status LEDs are not functional at this
time.
7
Depress IN pushbutton until the Room In, Air Seal, and Locked LEDs are lighted.
Summary of Contents for M380 2003
