Baumuller b maXX 1000, Parameter Manual

Page: 51 / 210

Parameter
Parameter manual b maXX
®
1000
Document no. 5.07004.03
51
of 208
4
P0807
This parameter sets the up/down mode only for external terminals.
This parameter determines the increase/decrease of the motor frequency when operated
via the multi function inputs (
Z
P1091
–
to
Z
P1094
–
are set to 10 (up command) or 11
(down command).
P0809
This parameter set the master frequency command source of the b maXX
®
1000.
The factory setting for master frequency command is 1 (digital keypad is optional).
Setting 2:
use the ACI/AVI switch on the b maXX
®
1000 to select ACI or AVI2. When setting to AVI,
AVI2 is indicated.
When the b maXX
®
1000 is controlled by external terminal, please refer to
Z
P0805
–
for
details.
The first/second frequency/operation command is enabled/disabled by multi function in-
put terminals. Please refer to
Z
P1091
–
to
Z
P1094
–
.
P0807 Hochlauf/Rücklauf Mode 0 to 3
EE Up/Down Mode 0
STOP BM_u_UpDownMode 1:1 -
Value Meaning
0 By digital keypad up/down keys mode
1 Based on acceleration/deceleration time according to
Z
P1172
–
,
Z
P1173
–
,
Z
P1180
–
,
Z
P1181
–
2 Constant speed (according to
Z
P0908
–
)
3 By pulse input unit (according to
Z
P0908
–
)
P0809 Quelle der zweiten Hauptfrequenzvorgabe 1 to 255
EE Source of second master frequency command 0
ON BM_u_SourceSecondMasterFrequComm 1:1 -
Value Meaning
255 Digital terminal 15 fixed set value
0 Digital keypad UP/DOWN keys or multi-function inputs UP/DOWN.
Last used frequency saved (digital keypad is optional).
1 0 to +10V from AVI
2 4 to 20mA from ACI or 0 to +10V from AVI2
3 ProDrive communication interface
4 Digital keypad potentiometer
5 CANopen