Baroness LM2700, Service Manual

Page: 46 / 325

Removal and installation of each
section
Engine
Removal of Engine
Disconnect the negative battery terminal.
Remove the hood. (See "Removal of Hood"
(Page 7-35) .)
Important
Be careful that removed parts do not fall into
the engine.
Follow the steps below to remove the
throttle wire.
Remove the cotter pin from the speed
adjustment lever on the engine.
Remove the washer and the flat-head
pin.
Remove the nut.
Remove the throttle wire.
6
5
1
2
3
4
o3sknc-040
Removal of Engine_001
1 Speed adjustment lever
2 Cotter pin
3 Washer
4 Flat-head pin
5 Nut
6 Throttle wire
1.
2.
3.
[1]
[2]
[3]
[4]
Remove the four nuts, spring washers, and
washers.
4
1
1 2
3
1 2
3
2
3
1 2
3
o3sknc-041
Removal of Engine_002
1 Washer
2 Spring washer
3 Nut
4 Muffler
Remove the four nuts and spring washers
from the muffler exhaust pipe on the rear
side of the machine, and then remove the
muffler and muffler exhaust pipe at the
same time.
1
2
3
2
o3sknc-042
Removal of Engine_003
1 Nut
2 Spring washer
3 Muffler exhaust pipe
4.
5.
LM2700
Engine
Page 4-18 Removal and installation of each section