Baroness LM2700, Service Manual

Page: 237 / 325

Removal of Step
Remove the bolts and spring washers, and
then remove the step.
1
2
3
wpztar-001
Removal of Step_001
1 Step
2 Spring washer
3 Bolt
Peel the step rubber from the step.
2
1
wpztar-002
Removal of Step_002
1 Step rubber
2 Step
Installation of Step
Caution
See "Tightening torques" (Page 3-5) .
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening etc.
For installation, reverse the removing
procedure.
1.
2.
Removal of Step Cover
Peel the step rubber, remove the three
bolts with the hex key, and then remove the
left step cover.
1
4
3
2
mokgrr-004
Removal of Step Cover_001
1 Bolt
2 Step cover
3 Hex key
4 Step rubber
Remove the right step cover in the same
way.
Installation of Step Cover
Caution
See "Tightening torques" (Page 3-5) .
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening etc.
For installation, reverse the removing
procedure.
Removal of Step Cover Rubber
Remove the step cover. (See "Removal of
Step Cover" (Page 7-43) .)
Pull the step rubber to remove it.
1.
2.
1.
2.
Main
bo
dy
LM2700
Main body
Page 7-43 Removal and installation of each section