Baroness LM2700, Service Manual

Page: 282 / 325

1 Roller housing
2 Stop ring A
3 Collar
4 O-ring
5 Oil seal-A
6 Bearing
7 Oil seal-B
8 Stop ring B
Important
The roller housing to install first must be
pushed all the way into the roller pipe.
Install the nuts, plate, and roller housing
in order onto one side of the roller pipe,
and lock them with a nut.
Install the roller shaft, roller, adjustment
washers, and spring onto the roller pipe.
1
2
3
7
8
4 5
6
8oscd1-011
#10433 -_009
1 Roller shaft
2 Roller pipe
3 Roller housing
4 Plate
5 Nut
6 Roller
7 Adjustment washer
8 Spring
[2]
[3]
Install the nuts and tighten them to the
maximum extent.
8oscd1-008
#10433 -_010
Tighten the plate and roller housing to
the maximum extent, and lock them with
nuts.
3 1 2 4 5
8oscd1-003
#10433 -_011
1 Roller housing
2 Plate
3 Roller shaft
4 Roller pipe
5 Nut
Check the total length of the front roller
Assy.
26-inch specification 696.0 mm (27.40 in)
[4]
[5]
5.
LM2700
Operating Machine and Mower Units
Page 8-34 Inspection and repair of each section