Baroness LM2700, Service Manual

Page: 269 / 325

1 Mower unit
2 Reel cover
3 Bolt
4 Spring washer
5 Washer
Lift up the reel cover in the direction of the
arrow from the mower unit to remove it.
2 1
bwen8e-003
Removal of Reel Cover_003
1 Mower unit
2 Reel cover
Installation of Reel Cover
Danger Danger
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
See the list in "Tightening torques" (Page
3-5) .
Note that the Baroness product warranty may
not apply to defects caused by incorrect
tightening etc.
For installation, reverse the removing
procedure.
4.
Mower Arm
Removal of Mower Arm
Danger Danger
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
See the list in "Tightening torques" (Page
3-5) .
Note that the Baroness product warranty may
not apply to defects caused by incorrect
tightening etc.
Remove the reel cover. (See "Removal of
Reel Cover" (Page 8-20) .)
Remove the S washer and nut used to fix
the mower stabilizer while supporting the
mower arm.
Tilt the mower arm toward the direction of
the arrow. 1.
2.
3.
Op
erating
Machin
e an
d
Mower Units
LM2700
Operating Machine and Mower Units
Page 8-21 Removal and installation of each section