Baroness LM2700, Service Manual

Page: 213 / 325

Remove the rear wheel and rear wheel
spacer from the wheel mounting base.
2
1
3
jnpvbf-004
Removal of Rear Wheel_002
1 Wheel mounting base
2 Rear wheel
3 Rear wheel spacer
Installation of Rear Wheel
Caution
See "Tightening torques" (Page 3-5) .
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening etc.
For installation, reverse the removing
procedure.
Brake
Removal of Brake Disc
Caution
Be careful when handling the brake disc
since it is heavy.
Remove the front wheel. (See "Removal of
Front Wheel" (Page 7-18) .)
Remove the caliper. (See "Removal of
Caliper" (Page 7-20) .)
3.
1.
2.
Remove the six bolts and spring washers.
1,2
3
mh71xo-005
Removal of Brake Disc_001
1 Bolt
2 Spring washer
3 Brake disc
Knock the perimeter of the brake disc with a
plastic hammer.
1
2
mh71xo-006
Removal of Brake Disc_002
1 Brake disc
2 Plastic hammer
Follow the steps below to install the brake
disc remover kit.
Remove the nut from the brake disc
remover kit.
3.
4.
5.
[1]
Main
bo
dy
LM2700
Main body
Page 7-19 Removal and installation of each section