Baroness LM2700, Service Manual

Page: 185 / 325

Installation of Level Switch
Caution
Completely remove the packing and adhesive
from the hydraulic tank.
Caution
See "Tightening torques" (Page 3-5) .
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening etc.
Apply adhesive to the new packing.
For installing, reverse the removing
procedure.
Delay Timer
(Seat safety switch timer)
The delay timer is located at the right inside of
the side cover, and if you leave the seat for 0.9
or more seconds while driving this machine, the
delay timer stops supplying power to the engine
stop solenoid (The engine stops.)
1
2
tmdyvy-001
Delay Timer_001
1 Delay timer
2 Fuel tank
Note:
Circuit diagram
1.
2.
1
+12V
SOL COIL
SEAT SW
GND
2
3
4
1
2
3
4
BLANK
BLANK
3 1
2 4
tmdyvy-002
Delay Timer_002
1 Delay timer
2 Coupler
3 Coupler position diagram
4 Wiring diagram
Inspection of Delay Timer
Remove the delay timer from the machine.
Caution
Do not short-circuit the battery terminals.
Follow the steps below to create a test
circuit.
Connect coupler terminal 1 to the battery
(+).
Connect lamp line 1 to coupler terminal
2.
Connect switch line 1 to coupler terminal
3.
Connect coupler terminal 4 to the battery
(-).
1.
2.
[1]
[2]
[3]
[4]
Elec
trical sy
stem
LM2700
Electrical system
Page 6-37 Electrical components