Baroness LM2700, Service Manual

Page: 288 / 325

Follow the steps below to disassemble the
groomer cover.
Remove the nipple.
Remove the strip ring and bearing.
Remove the copper washers, gear, and
needle bearing.
Remove the intermediate shaft and O ring.
2
1
3
4
5
6
7
9
8
t7ajai-002
Groomer Assy_002
1 Groomer cover
2 Nipple
3 Ball bearing
4 Stop ring
5 O-ring
6 Intermediate shaft
7 Needle bearing
8 18-tooth gear
9 Copper washer
Follow the steps below to disassemble the
groomer case.
Remove the bolt, spring washer, and
washer.
Remove the 17-tooth gear.
3.
[1]
[2]
[3]
[4]
4.
[1]
[2]
Remove the key.
4
6
5
2
1
3
7
t7ajai-003
Groomer Assy_003
1 Groomer case
2 Packing
3 Bolt
4 Spring washer
5 Washer
6 17-tooth gear
7 Key
Remove the nipple.
Pull out the groomer shaft Assy, dust-
proof plate, and collar.
Remove the groomer adjustment bolt.
1
2
4
5
6
3
t7ajai-004
Groomer Assy_004
1 Groomer case
2 Nipple
3 Groomer adjustment bolt
4 Collar
5 Dust-proof plate
Remove the stop ring and oil seal of
groomer receptacle A of the groomer
case.
[3]
[4]
[5]
[6]
[7]
LM2700
Operating Machine and Mower Units
Page 8-40 Inspection and repair of each section