Baroness LM2700, Service Manual

Page: 281 / 325

1 Roller housing
2 Stop ring A
3 Collar
4 O-ring
5 Oil seal-A
6 Bearing
7 Oil seal-B
8 Stop ring B
Important
Be sure to replace the bearings, oil seals and
O-rings with new ones.
Apply a profuse amount of grease on new
bearings and oil seals .
To bearings, apply grease like rubbing
until the grease leaks from the other side.
Also apply a profuse amount of grease to
the lip of the oil seal.
1
2
uxqrbr-002
#10433 -_007
1 Ball bearing
2 Oil seal
Follow the steps below to assemble the
front roller.
Install stop ring B, oil seal B, bearing, oil
seal A, O-ring, collar, and stop ring A
onto the roller housing.
1
8
7
6
5
4
3
2
8oscd1-007
#10433 -_008
3.
4.
[1]
Op
erating
Machin
e an
d
Mower Units
LM2700
Operating Machine and Mower Units
Page 8-33 Inspection and repair of each section