Baroness LM2700, Service Manual

Page: 246 / 325

Throttle wire
Inspection of Throttle Lever and Wire
Movement of the lever may become dull, play
of the inner wire depending on R angle of the
outer wire may change, and the inner wire may
be stretched due to frequent use.
Inspect them and, if necessary, implement
adjustment etc.
Check to ensure that the throttle lever
moves smoothly.
1
qciz41-006
Inspection of Throttle Lever and Wire_001
1 Throttle lever
Check to ensure that the throttle lever does
not return at the maximum rpm.
1
qciz41-007
Inspection of Throttle Lever and Wire_002
1 Throttle lever
1.
2.
Check to ensure that the throttle wire is not
bent or broken.
1
qciz41-008
Inspection of Throttle Lever and Wire_003
1 Throttle wire
Toe-in
Inspection of Tie Rod and Rod Ends
Due to damage to the tie rod and rod ends, it
may become difficult to properly handle the
machine.
Inspect them and, if necessary, implement
adjustment etc.
Make sure that the adjusted value of toe-in
is appropriate. (See "Adjusted Value" (Page
7-2) .)
Make sure that the tie rod is not bent.
Make sure that the rod ends are not bent
nor worn.
Make sure that the cotter pins are not
missing from the rod ends.
Make sure that the slotted nuts are not
loose.
3.
1.
2.
3.
4.
5.
LM2700
Main body
Page 7-52 Inspection and repair of each section