
Fuel pipe
Inspection of Fuel Hose
Danger
Danger
A damaged fuel hose may result in fuel
leakage or fire.
Inspect the fuel hose and the tightening state
of the fuel hose clamp after the first 50 hours of
operation, then after every 100 hours of
operation or every 6 months, whichever comes
first.
Follow the steps below to perform the
inspection and repair procedure, according
to the periodic inspection schedule.
If the clamp is loose, apply oil to the
threaded end, and then firmly tighten it.
If the fuel hose or clamp is damaged or
the fuel hose is not securely installed,
repair or replace it as soon as possible.
The fuel hose is made of rubber and is a
consumable that ages, even if it is not
used.
Replace it with a new one every 2 years.
At the same time, also replace the clamp
with a new one and firmly tighten it.
Note:
Air bleeding is not necessary with this
machine. Air bleeding will occur
automatically.
IN
OUT
IN
1
1
4
1
1
2
2
3
OUT
tuzdiu-003
Inspection of Fuel Hose_001
1.
[1]
[2]
[3]
1
Fuel hose
2
Clamp
3
To the engine
4
Fuel tank
Engine Oil
Recommended Oil
Do not use special additives.
Be sure to use Grade CF or higher when using
Kubota genuine oil.
Use D10W-30 Super CF (all-season) at
temperatures less than 15 °C, and use D30
Super CF or D10W-30 Super CF at
temperatures of 15 °C or more.
Important
Do not mix different types of engine oil.
Be sure to use engine oil that is classified as
API Service Grade CF or higher, with an SAE
viscosity that is appropriate for the operating
environment (ambient temperature).
Inspection of Engine Oil
Important
Securely tighten the oil level gauge and oil
filler cap.
If they are insufficiently tightened or there is
an insufficient seal, negative pressure inside
the crankcase cannot be maintained, causing
the oil to rise, possibly resulting in the
production of white smoke and damage to the
engine.
Stop the engine, wait for 10 to 20 minutes
for the engine to cool down, and then check
the oil level.
1.
LM2700
Engine
Page 4-14
Inspection and repair of each section
Summary of Contents for LM2700
