Baroness LM2700, Service Manual

Page: 143 / 325

Gear Motor (for Cooling Fan)
Removal of Gear Motor (for Cooling Fan)
Important
Before removing the hydraulic hose, check its
installation position.
Remove the three hydraulic hoses from the
gear motor.
3
1
2
2
hlw3ga-001
Removal of Gear Motor (for Cooling Fan)_001
1 Gear motor
2 Hydraulic hose
3 Shroud
Remove the four sets of parts: two sets of
bolts, spring washers, and washers, and
two sets of nuts, spring washers, and
washers, used to install the gear motor.
1
2,3,4
3,4,5
hlw3ga-002
Removal of Gear Motor (for Cooling Fan)_002
1.
2.
1 Gear motor
2 Bolt
3 Spring washer
4 Washer
5 Nut
Remove the gear motor from the cooling
fan mounting bracket in the direction of the
arrow.
3
4
2
1
hlw3ga-003
Removal of Gear Motor (for Cooling Fan)_003
1 Gear motor
2 Shroud
3 Cooling fan mounting bracket
4 Pulley housing
Remove adapters A and B from the gear
motor.
2
3
1
2
hlw3ga-004
Removal of Gear Motor (for Cooling Fan)_004
1 Gear motor
2 Adapter A
3 Adapter B
3.
4.
Hy
draulic system
LM2700
Hydraulic system
Page 5-89 Removal and installation of each section