8.MAINTENANCE
71
Supply grease to the plungers once every six months.
Be careful not to allow grease or dust to get on the photosensors.
To prevent damage to electrical circuits due to incorrect connector connection,
check the direction of the connector carefully when connecting.
8-1-2 Maintenance items
(1) Supplying grease to the plungers in the Pedal Assys - To be conducted by a technician only -
Turn off the power switch.
Loosen the four flange socket bolts (M6 x 12) on the Pedal Assy side(1).
Remove the four flange socket bolts (M6 x 12) on the Control Assy side, disconnect
the connector, then dismount the Pedal Assy(2).
* The following describes the procedures to remove and reinstall parts on the (L) side.
The parts on the (R) side can be removed and reinstalled by following the same
procedures.
To protect the service staff and other people from electric shock, accident and
injury and to prevent damage to the electric circuitry of the machine, be sure
to turn off the power switch before initiating the described task.
WARNING
Pedal Assy
Control Assy
Connector
Flange socket bolts (M6 x 12)
(to be removed)
Flange socket bolts (M6 x 12)
(to be loosened)
Housing
Summary of Contents for RAZING STORM
Page 4: ...ii Notes...
Page 130: ...126 10 PARTS LISTS 10 8 Gun Assy...
Page 132: ...128 10 PARTS LISTS 10 9 Pedal Assy...
Page 134: ...130 10 PARTS LISTS MEMO...