Bandai Namco RAZING STORM, Operation Manual, Page: 93 / 136

8.MAINTENANCE
89
Disconnect the connector from the illuminated switch to be replaced, and turn the
illuminated switch to the left to remove.
Pull out the LED lamp from the illuminated switch.
Replace the illuminated switch or LED lamp, and reinstall the switch by following
the removal sequence in reverse. During the installation, make sure that the red
connector is located at the position where a red sticker is adhered on the control
panel.

Be careful not to pinch connectors or harnesses during installation.

After the replacement, be sure to confirm that the illuminated switch operates and
the LED lamp lights up. (See P. 54 "74-4 (c) SWITCH TEST.")
Connector
Illuminated switch
Illuminated switch
LED lamp