90
8.MAINTENANCE
* The following describes the procedures to remove and reinstall parts on the (L) side.
The parts on the (R) side can be removed and reinstalled by following the same
procedures.
(2) Replacing the LED-Edge PC Board - To be conducted by a technician only -
To protect the service staff and other people from electric shock, accident and
injury and to prevent damage to the electric circuitry of the machine, be sure
to turn off the power switch before initiating the described task.
To prevent damage to electrical circuits due to incorrect connector connection,
check the direction and shape of the connector carefully when connecting.
Turn off the power switch.
Replace the upper LED-Edge PC Boards according to the following directions.
Remove the four Torx bolts (M5 x 12) in total and dismount the gun holder cover (L)
or (R) and the gun holder cover (C). (The following diagram shows the (L) side.)
Remove the three Phillips pan-head bolts (with flat and spring washers (M3 x 6),
dismount each LED-Edge PC Board, and disconnect the connector.
WARNING
Gun holder cover (C)
Torx bolts
(M5 x 12)
Torx bolts (M5 x 12)
Gun holder cover (L)
Connectors
LED-Edge PC Board
Phillips pan-head screw
(with flat and spring washers)
(M3 x 6)
Phillips pan-head screw
(with flat and spring washers)
(M3 x 6)
To reinstall, follow the removal sequence in reverse.
Summary of Contents for RAZING STORM
Page 4: ...ii Notes...
Page 130: ...126 10 PARTS LISTS 10 8 Gun Assy...
Page 132: ...128 10 PARTS LISTS 10 9 Pedal Assy...
Page 134: ...130 10 PARTS LISTS MEMO...
