Bandai Namco RAZING STORM, Operation Manual

Page: 19 / 136

15

Install the machine according to the instructions and procedures specified in
this operation manual. Failure to follow the specified procedures may result in
a fire, electric shock, injury or machine malfunctions.

Insert the power cord plug firmly into the AC outlet. Poor contact may cause
overheating that can lead to a fire or burns.

Be sure to connect the ground lead. If the ground lead is not connected, electric
shock can result in case of electrical leakage. (See P. 33 "5-6 Connecting the
power cord and ground lead.")

Install the machine securely by using the level adjusters. Unstable machine
installation can result in an accident or injury. (See P. 22 "5-3-1 Adjusting the
level adjusters.")
5-1 Installation conditions
5-1-1 Locations to avoid

The machine is designed for indoor use. Never install the machine outdoors or
at any of the following locations:

Place in direct sunlight

Place exposed to rain or water leakage

Damp place

Dusty place

Close to heating devices

Hot place

Extremely cold place

Place where moisture condensation may occur due to temperature
differences

Place where the machine may become an obstruction in emergencies
(such as near emergency exit) and place where fire extinguisher or similar
equipment is installed

Unstable place or location where vibrations are produced

Do not install the machine in any of the following places since those locations
may disallow the sensors from detecting the positions of the Gun Assys.

Place where bright light such as sunlight or spot light can directly shine on
the Gun Assys or screen surface

Provide a space of at least 50 cm between the rear side of the machine and the
wall or other machine in order to turn the power switch ON/OFF and open the
back door for maintenance.
5. INSTALLATION
WARNING
WARNING