8.MAINTENANCE
111
Be sure to conduct an operation check after replacing the photosensor.
(See P. 54 "7-4-4 (c) SWITCH TEST.")
Remove the two countersunk washer nuts (M4) and dismount the sensor base
together with the photosensor.
Disconnect the connector, remove the Phillips pan-head screw (with flat and spring
washers) (M3 x 12), and dismount the photosensor from the sensor base.
To reinstall, follow the removal sequence in reverse.
Photosensor
Countersunk washer nuts (M4)
Sensor base
Cover
Torx bolt (M5 x 12)
Torx bolt (M5 x 12)
Summary of Contents for RAZING STORM
Page 4: ...ii Notes...
Page 130: ...126 10 PARTS LISTS 10 8 Gun Assy...
Page 132: ...128 10 PARTS LISTS 10 9 Pedal Assy...
Page 134: ...130 10 PARTS LISTS MEMO...