35
6. MOVING AND TRANSPORTING
Do not leave the machine on a slope. If the machine is left on a slope, it may
tip over and cause an unexpected accident.
6-1 Moving (on the floor)
When moving the machine, separate the machine into the Projector Tower Assy,
Control Assy and Pedal Assys.
Be sure to raise the level adjusters all the way even when moving the machine
for a short distance. (See P. 22 "5-3-1 Adjusting the level adjusters.")
The overall height of the Projector Tower Assy is approximately 2,300 mm.
Check the heights of doors and other openings in the carry-in passage.
Carefully transport the machine in order to prevent damage to the machine.
When carrying manually, secure the Gun Assys to the Control Assy by
using tape or rope, or dismount the Gun Assys. If the Gun Assy drops,
it can cause an accident or injury.
Make sure that the Gun Assy tubes do not get caught or pulled during moving.
WARNING
Summary of Contents for RAZING STORM
Page 4: ...ii Notes...
Page 130: ...126 10 PARTS LISTS 10 8 Gun Assy...
Page 132: ...128 10 PARTS LISTS 10 9 Pedal Assy...
Page 134: ...130 10 PARTS LISTS MEMO...