Bandai Namco RAZING STORM, Operation Manual

Page: 81 / 136

8.MAINTENANCE
77
8-2-5 Gun Assy
- To be conducted by a technician only -
Page 68
•The gun muzzle section is dirty.
•Gun shots are not normal.
•The trigger does not operate.
•Clean.
Page 51
•The gun aim is misaligned. •Adjust the gun aim.
Page 68
•The filter sections are dirty. •Clean.
Page 80
•The LED Board is faulty. •Replace the LED Board.
Page 101
•The light receiving unit is faulty. •Replace the light receiving unit.
Page 92
•The CPU Board is faulty. •Replace the CPU Board.
Page 94, 97
104 and 108
Page 96, 97
and 108
•The connector is disconnected. •Connect the connector.
•The connector is disconnected. •Connect the connector.
Page 102
and 107
•The microswitch is defective. •Replace the microswitch.
Page 104
•Replace the solenoid.
•The gun muzzle is positioned too close to
the screen.
•Keep a sufficient distance from the
screen during the game play. (The
distance between screen and gun
muzzle should be at 60 cm or more.)
Page 17
Page 96 & 97
•The connector is disconnected. •Connect the connector.
Page 94
•The USIO PC Board is faulty. •Replace the USIO PC Board.
Page 96
•The GUN DRIVE PC Board is faulty. •Replace the GUN DRIVE PC Board.
•The USIO PC Board is faulty. •Replace the USIO PC Board.
•The GUN DRIVE PC Board is faulty. •Replace the GUN DRIVE PC Board.
Page 96
Page 94
•The USIO PC Board is faulty. •Replace the USIO PC Board.
•The GUN DRIVE PC Board is faulty. •Replace the GUN DRIVE PC Board.
Page 96
Page 94
•Vibration is not produced.
•The rotary solenoid is damaged.
•Two or more units are installed next to
each other.
•Check the sensor channel setting.
Remedy Page Symptom Cause