Bandai Namco RAZING STORM, Operation Manual

Page: 87 / 136

8.MAINTENANCE
83
(3) Replacing the MCD AMP PC Board - To be conducted by a technician only -
Turn off the power switch.
Dismount the front plate door. (See P. 79 “8-3-1 (1) Replacing the LED Board” [2].)
Disconnect the four connectors, remove the four Phillips pan-head screws (with flat
and spring washers) (M3 x 6), then dismount the MCD AMP PC Board.
To reinstall, follow the removal sequence in reverse.

Be sure to conduct an operation check and settings check after the replacement.
(See P. 46 "7-4 Test mode.")

To protect the service staff and other people from electric shock, accident and
injury and to prevent damage to the electric circuitry of the machine, be sure
to turn off the power switch before initiating the described task.

To prevent damage to electrical circuits due to incorrect connector connection,
check the direction of the connector carefully when connecting.

The PC board can be easily damaged by static electricity. If the PC board is handled
by a person charged with static electricity, parts mounted on the PC board can
become damaged. Before touching the PC board, be sure to remove static electricity
from you body by touching a grounded metal.
WARNING
MCD AMP PCB
MCD AMP PCB
Connectors
Phillips pan-head screws
(with flat and spring washers) (M3 x 6)