8.MAINTENANCE
97
8-3-4 Gun Assy
To protect the service staff and other people from electric shock, accident and
injury and to prevent damage to the electric circuitry of the machine, be sure
to turn off the power switch before initiating the described task.
To prevent damage to electrical circuits due to incorrect connector connection,
check the direction of the connector carefully when connecting.
(1) Replacing the Gun Assy - To be conducted by a technician only -
* The following describes the procedures to remove and reinstall parts on the (L) side.
The parts on the (R) side can be removed and reinstalled by following the same
procedures.
Turn off the power switch.
Dismount the gun box cover from the rear side of the Control Assy by loosing the
bottom three Torx bolts (M5 x 12) and removing the top three bolts.
Disconnect the connector and remove the two countersunk washer nuts (M5) and
release the security restraint bracket by removing the nut securing it to the cabinet .
WARNING
Connector
Torx bolt (M5 x 12)
Torx bolt (M5 x 12)
Gun box cover
Countersunk washer nuts (M5)
Security restraint brkt.
Summary of Contents for RAZING STORM
Page 4: ...ii Notes...
Page 130: ...126 10 PARTS LISTS 10 8 Gun Assy...
Page 132: ...128 10 PARTS LISTS 10 9 Pedal Assy...
Page 134: ...130 10 PARTS LISTS MEMO...