112
8.MAINTENANCE
(2) Replacing the plunger - To be conducted by a technician only -
To prevent damage to electrical circuits due to incorrect connector connection,
check the direction and shape of the connector carefully when connecting.
To protect the service staff and other people from electric shock, accident and
injury and to prevent damage to the electric circuitry of the machine, be sure
to turn off the power switch before initiating the described task.
Turn off the power switch.
After confirming that the power switch is OFF, dismount the Pedal Assy, and take
out the holder. (See P. 71 “8-1-2 (1) Supplying grease to the plungers in the Pedal
Assys.”)
Pull out the plunger from the holder and install a new plunger. In this process, apply
grease to the plunger surface areas that contact the holder and plate.
Designated grease: Alvania Grease No. 2 (Showa Shell)
Wipe off old grease from the plate surface on the pedal side, and apply new grease.
Be sure to conduct an operation check after replacing the plunger.
(See P. 54 "7-4-4 (c) SWITCH TEST.")
WARNING
Plunger
Holder
Spring (B)
Apply grease.
Plate
To reinstall, follow the removal sequence in reverse.
Summary of Contents for RAZING STORM
Page 4: ...ii Notes...
Page 130: ...126 10 PARTS LISTS 10 8 Gun Assy...
Page 132: ...128 10 PARTS LISTS 10 9 Pedal Assy...
Page 134: ...130 10 PARTS LISTS MEMO...