7. OPERATION
53
To adjust the gun aim, follow the procedure described below.
Be sure to hold the Gun Assy straight. Do not tilt the Gun Assy.
Hold the Gun Assy toward the screen so that the rear sight notch aligns with
the horizontal line of the cross hairs(+) on the screen.
Also align the front sight post at the tip of the Gun Assy with the horizontal
line of the cros) on the screen.
Make sure that the rear sight center and the front sight center are level with
the cross hair(+) center.Then hold the Gun Assy vertically and fire a shot.
Both front and rear sights must be
aligned on a straight line.
Each time the trigger is pulled, the crosshair moves in order from
1
to
5
. When
the trigger is pulled while the crosshair is at position
5
, “OK” appears on the
screen and the gun aim adjustment starts. Then, the display returns to the “Gun
INITIALIZE” screen (1).
Using the Gun Initialize screen (1), make sure that the gun aim is accurate in the
entire screen from edge to edge.
If the gun aim is not accurate, press the Service switch (or press the pedal). When
the “Gun INITIALIZE” screen (2) appears, conduct the adjustment again.
Press the Enter switch to return to the I/O Test screen.
Summary of Contents for RAZING STORM
Page 4: ...ii Notes...
Page 130: ...126 10 PARTS LISTS 10 8 Gun Assy...
Page 132: ...128 10 PARTS LISTS 10 9 Pedal Assy...
Page 134: ...130 10 PARTS LISTS MEMO...
