Bandai Namco RAZING STORM, Operation Manual

Page: 56 / 136

52
7. OPERATION
Press the Service switch (or press the pedal) while the display is showing the Gun
Initialize screen (1) to activate to the Gun Initialize screen (2). Then, adjust the aim
of the Gun Assy. This mode enables the adjustment of minor deviation resulting from
the installation conditions or individual characteristics of the Gun Assy light receiving
unit and LED Board.
Gun Initialize screen (2)
Sight adjustment target
① Center
②
Upper left corner,
③
Upper right corner,
④ Lower right corner,
⑤
Left lower corner
AIM AT CENTER OF THE CROSS AND PULL GUN TRIGGER
①
② ③
④
⑤
The aim of the Gun Assy is adjusted by shooting five locations on the screen.
A crosshair appears at locations
1
to
5
in order. Aim the center of the crosshair
and pull the trigger of the Gun Assy.
* If the aim is outside the screen, “NG, retry” appears on the screen and a crosshair
does not appear at the next target position. See the next page regarding the gun aim
adjust ment procedure.