Bandai Namco RAZING STORM, Operation Manual

Page: 108 / 136

104
8.MAINTENANCE
(7) Replacing the rotary solenoid - To be conducted by a technician only -

To protect the service staff and other people from electric shock, accident and
injury and to prevent damage to the electric circuitry of the machine, be sure
to turn off the power switch before initiating the described task.

To prevent damage to electrical circuits due to incorrect connector connection,
check the direction and shape of the connector carefully when connecting.
Turn off the power switch.
Dismount the vibrating unit. (See P. 103 “8-3-4 (6) Replacing the vibrating unit.”)
Remove the four Phillips pan-head screws (with flat and spring washers) (M4 x 8),
pull out the slider, then dismount gun frame A.
WARNING
Slider
Rotary solenoid
Gun frame A
Gun frame B
Phillips pan-head screw
(with flat washer) (M4 x 8)
Phillips pan-head screw
(with flat washer) (M4 x 8)
Flange socket bolt
(M4 x 12)
Stopper frame
Crank
Remove the four flange socket bolts (M4 x 12) and dismount the stopper frame.