8.MAINTENANCE
87
8-3-2 Signboard Assy
(1) Replacing the fluorescent/glow lamp - To be conducted by a technician only -
To protect the service staff and other people from electric shock, accident and
injury and to prevent damage to the electric circuitry of the machine, be sure
to turn off the power switch before initiating the described task.
The fluorescent lamp becomes hot. Be careful not to get burned when removing.
Since the replacement of the fluorescent lamp or glow lamp must be conducted
at a height, exercise caution.
Turn off the power switch.
Remove the three Torx bolts (M5 x 12) and dismount the signboard FL top plate.
Replace the fluorescent lamp (30W) and/or glow lamp (FG-4P).
To reinstall, follow the removal sequence in reverse.
CAUTION
WARNING
Fluorescent lamp
Signboard FL top plate
Signboard Assy
Glow lamp
Projector
Torx bolts (M5 x 12)
Summary of Contents for RAZING STORM
Page 4: ...ii Notes...
Page 130: ...126 10 PARTS LISTS 10 8 Gun Assy...
Page 132: ...128 10 PARTS LISTS 10 9 Pedal Assy...
Page 134: ...130 10 PARTS LISTS MEMO...