5. INSTALLATION
23
Since the installation of the Signboard Assy must be conducted at a height,
prepare a step ladder or platform to stand on. Performing the task in an awkward
position can result in injury or machine damage.
The Signboard Assy weighs approximately 25 kg. The installation task should be
performed by at least three persons in a sufficiently large work area to prevent
accidents.
Using four Torx bolts (M5 x 12) and four flat washers (M5), install the center plate to
the front side of the Signboard Assy, making sure that the center plate is positioned
on the center plate support.
From the rear side of the Signboard Assy, install the back plate with four Torx bolts
(M5 x 12) and four flat washers.
Dismount the signboard door plates by removing two Torx bolts (M5 x 20) from each
plate (total of four bolts).
Center plate
Torx bolts (M5 x 12)
Flat washers (M5)
Center plate support
Signboard Assy
Torx bolts (M5 x 12)
Flat washers (M5)
Signboard door plate
Torx bolt (M5 x 20)
Flat washers (M5)
Torx bolt (M5 x 20)
Torx bolts (M5 x 12)
Back plate
Signboard door plate
5-3-2 Assembling the Signboard Assy - To be conducted by a technician only -
WARNING
CAUTION
Summary of Contents for RAZING STORM
Page 4: ...ii Notes...
Page 130: ...126 10 PARTS LISTS 10 8 Gun Assy...
Page 132: ...128 10 PARTS LISTS 10 9 Pedal Assy...
Page 134: ...130 10 PARTS LISTS MEMO...