84
8.MAINTENANCE
(4) Replacing the LED-Edge PC Board - To be conducted by a technician only -
* The following describes the procedures to remove and reinstall parts on the (R) side.
The parts on the (R) side can be removed and reinstalled by following the same
procedures.
To protect the service staff and other people from electric shock, accident and
injury and to prevent damage to the electric circuitry of the machine, be sure
to turn off the power switch before initiating the described task.
To prevent damage to electrical circuits due to incorrect connector connection,
check the direction of the connector carefully when connecting.
The PC board can be easily damaged by static electricity. If the PC board is handled
by a person charged with static electricity, parts mounted on the PC board can
become damaged. Before touching the PC board, be sure to remove static electricity
from you body by touching a grounded metal.
Turn off the power switch.
Remove the six Torx bolts (M5 x 12), loosen the bolt at the top, then dismount the
side pillar cover (R).
WARNING
Torx bolt (M5 x 12)
Torx bolt (M5 x 12)
Torx bolt (M5 x 12)
(to be loosened)
Projector Tower Assy (rear side)
Side pillar cover (R)
Summary of Contents for RAZING STORM
Page 4: ...ii Notes...
Page 130: ...126 10 PARTS LISTS 10 8 Gun Assy...
Page 132: ...128 10 PARTS LISTS 10 9 Pedal Assy...
Page 134: ...130 10 PARTS LISTS MEMO...