Avaya 3050-VM User Manual Download Page 92

Page: 92 / 274

In a text editor, open the .csr file you created in

step 4

on page 90. It should appear

similar to the following:

Copy the entire CSR, including the

"-----BEGIN CERTIFICATE REQUEST----- " and "-----END CERTIFICATE

REQUEST----- "

lines.

7. Submit the CSR to Verisign, Entrust, or any other CA.

The process for submitting the CSR varies with each CA. Use your Web browser

to access your CA's Web site and follow the online instructions. When prompted,

paste the CSR into the space provided on the CA's online request process. If the

CA requires that you specify a server software vendor whose software you

supposedly used to generate the CSR, specify Apache.

The CA will return the signed certificate for installation. The certificate is then ready

to be added into the VPN Gateway.

Adding Certificates to the AVG

Using the encryption capabilities of the VPN Gateway requires adding a key and certificate

that conforms to the X.509 standard to the VPN Gateway. If you have more than one VPN

Gateway in a cluster, the key and certificate need only be added to one of the devices. As with

configuration changes, the information is automatically propagated to all other devices in the

cluster.

Certificates and Client Authentication

92 User Guide

April 2013

Comments? [email protected]

Summary of Contents for 3050-VM



















































































































































































































































































Search results

Summary of Contents for 3050-VM

Reviews:

Avaya 3050-VM, User Manual, Page: 92 / 274

Search results

Summary of Contents for 3050-VM

Reviews: