manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 16 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 16

Customer service

Visit the Avaya Web site to access the complete range of services and support that Avaya

provides. Go to 

http://www.avaya.com

 or go to one of the pages listed in the following

sections.

Navigation

•

Getting technical documentation

 on page 16

•

Getting product training

 on page 16

•

Getting help from a distributor or reseller

 on page 16

•

Getting technical support from the Avaya Web site

 on page 16

Getting product training

Ongoing product training is available. For more information or to register, you can access the
Web site at 

http://www.avaya.com/support

. From this Web site, you can locate the Training

contacts link on the left-hand navigation pane.

Getting help from a distributor or reseller

If you purchased a service contract for your Avaya product from a distributor or authorized
reseller, contact the technical support staff for that distributor or reseller for assistance.

Getting technical documentation

To download and print selected technical publications and release notes directly from the
Internet, go to 

http://www.avaya.com/support

.

Getting technical support from the Avaya Web site

The easiest and most effective way to get technical support for Avaya products is from the
Avaya Technical Support Web site at 

http://www.avaya.com/support

.

Preface

16     User Guide

April 2013

Comments? [email protected]

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments