manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 175 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 175

• Name: hsm_tampered_with Sender: <IP>, <Token> Cause: hsm_detected Extra:

"Card<Token> " Severity: critical

• Name: slave_not_starting Sender: <IP>, <SlaveNo> Cause: start_error |

connect_timeout | fdsend | nothidden | name_resolv | nodename_occupied Extra:"
Severity: warning

The portal handling subsystem cannot be started.

When an alarm is cleared, one of the following messages are sent:

Alarm Cleared Name="<Name>" Id="<ID>" Sender="<Sender>" Alarm Cleared Id="<ID>"

EVENT

Events are sent at the NOTICE syslog level. They are formatted according to the following
pattern:

Name: <Name> Sender: <Sender> Extra: <Extra>

• Name: partitioned_network Sender and Extra is lower level information.

Sent to indicate that a VPN Gateway is recovering from a partitioned network situation.

• Name: ssi_mipishere Sender: ssi Extra: <IP>

Tells that the MIP (management IP address) is now located at the VPN Gateway with the
<IP> host IP address.

• Name: license_expire_soon Sender: <IP>

Indicates that the loaded (demo) license at the <IP> VPN Gateway expires within 7
days.

• Name: aaa_license_exhausted Sender: <IP>:<VPNIndex> Extra: ssl | IPsec

This event is sent when the VPN has run out of SSL or IPsec user licenses. A hysteris
mechanism is used so that no more than one event per hour is sent for one VPN.

If <VPNIndex> is 0, the globally shared license was exhausted.

• Name: software_configuration_changed Sender: system Extra: software release version

<VSN> <Status> Indicates that release <VSN> (version) has been <Status> (unpacked/
installed/permanent).

• Name: software_release_copying Sender: <IP> Extra: copy software release <VSN>

from other cluster member

Indicates that <IP> is copying the release <VSN> from another cluster member.

• Name: software_release_rebooting Sender: <IP> Extra: reboot with release version

<VSN>

List of Syslog Messages

User Guide

April 2013     175

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments