manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 67 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 67

Password:

ForgetMe

               *** Reinstall Upgrade Procedure ***

If you proceed beyond this point, the active network 

configuration will be reset, requiring a reboot to restore any 

current settings. However, no permanent changes will be done 

until the boot image has been downloaded.

Continue (y/n)? [y]:

<Press ENTER to continue>

2. Confirm the network port setting, and the IP network settings.

(reinstall procedure, continued)

Select a network port (1-4, or i for info) [1]:

<Press ENTER if 

correct, or change to the port you are using for network 

connectivity>

Enter VLAN tag id (or zero for no VLAN tag) [0]:

<VLAN tag id or 

ENTER>

Enter IP address for this iSD [192.168.128.185]: 

<Press ENTER if 

the IP address displayed within square brackets is correct.>

Enter network mask [255.255.255.0]:

<Press ENTER if correct.>

Enter gateway IP address [192.168.128.1]:

<Press ENTER if 

correct.>

 Note:

If the VPN Gateway has not been configured for network access previously, or if

you have deleted the VPN Gateway from the cluster by using the 

/boot/

delete

 command, you must provide information about network settings such as

interface port, IP address, network mask, and gateway IP address. No suggested

values related to a previous configuration will be presented within square

brackets.

3. Select a download method, specify the server IP address, and the boot image file

name.

(reinstall procedure, continued)

Select protocol (ftp/scp/sftp) [ftp]:

ftp

Enter FTP server address:

10.0.0.1

Enter file name of boot image:

SSL-7.0.x-boot.img

Enter FTP Username [anonymous]:

john

Password:

password

Downloading boot image...

Installing new boot image...

Done

Reinstalling the Software

User Guide

April 2013     67

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments