manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 85 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 85

passwd

- Change own password

expire

- Set password expire time
interval

list

- List all users

del

- Delete a user

add

- Add a new user

edit

- Edit a user menu

caphrase

- Certadmin export
passphrase

3. Specify the user name of the user you want to remove from the system

configuration.

In this example, the cert_admin user is removed from the system. To list all users

that are currently added to the system configuration, use the 

list

 command.

>> User#

del cert_admin

4. Verify and apply the changes.

The imminent removal of the cert_admin user is indicated as a pending

configuration change by the minus sign (-). To cancel a configuration change that

has not yet been applied, use the 

revert

 command.

>> User#

list

   oper

root

admin

-cert_admin
>> User#

apply

Deleting a User

User Guide

April 2013     85

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments