manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 144 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 144

If you chose FIPS mode when initializing the first HSM card in the cluster, you will

be asked to enter the secret passphrase. Enter the same secret passphrase as

when initializing the first HSM card in the cluster.

11. Wait for the setup of the added ASA 310-FIPS to finish.

(join setup, continued)

Setup successful.

login:

12. Log in to the ASA 310-FIPS ASA 310-FIPS that you are currently connected to and

restore the configuration file of the former cluster from an FTP/TFTP/SCP/SFTP

server.

login:

admin

Password:

Alteon iSD SSL

Software version 9.0

>> Main#

cfg/gtcfg

Select protocol (tftp/ftp/scp/sftp) [tftp]:

ftp

Enter hostname or IP address of server:

<server IP address>

Enter name of file on server:

<name of saved configuration file>

FTP User (anonymous):

<press ENTER if anonymous mode is supported>

Password:

Received 4960 bytes in 0.1 seconds

Password for importing private keys in cfg:

<password as defined 

when saving the configuration file to an FTP/TFTP/SCP/SFTP server>

Configuration loaded.

>> Configuration#

The configuration information is now automatically propagated and applied to all

ASA 310-FIPS devices in the cluster. The information includes certificates and

encrypted private keys.

A User Fails to Connect to the VPN

There can be different reasons for why a user is having difficulty authenticating to the VPN or

why a client connection cannot be established: the user name or password is wrong, the

Troubleshooting the AVG

144     User Guide

April 2013

Comments? [email protected]

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments