manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 169 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 169

ALTEON-SSL-VPN-MIB

The ALTEON-SSL-VPN-MIB contains SSL/IPsec user statistics and SSL/IPsec license
information for all VPNs. It also contains authentication server statistics. The following groups
are implemented:

• vpnBasicGroup

• vpnEventGroup

IANAifType-MIB

Defines the IANAifType Textual Convention, and thus the enumerated values of the ifType
object defined in MIB-II's ifTable.

Supported Traps

The following SNMP traps are supported by the VPN Gateway:

Table 7: Traps Supported by the VPN Gateway

Trap Name

Description

alteonISDSSLHsmN
otLoggedIn

Signifies that login to the HSM card is required. Only for the ASA 310
FIPS model.

alteonISDSSLHsmT
amperedWith

Signifies that the HSM card has been tampered with. Only for the
ASA 310 FIPS model.

alteonISDSSLHwFai
l

Signifies that the SSL accelerator hardware failed. The VPN
Gateway will continue to handle traffic, but with severely degraded
performance.

authenticationFailure Sent when the SNMP agent receives an SNMP message which is

not properly authenticated. This trap is disabled by default. To
enable the trap through SNMP, set

snmpEnableAuthenTraps

to enabled or use the CLI command 

/cfg/sys/adm/snmp/

snmpv2-mib/snmpenable

. Defined in SNMPv2-MIB.

coldStart

Sent when the VPN Gateway reboots. Defined in SNMPv2-MIB.

isdAlarmCleared

Sent when an alarm is cleared.

Supported Traps

User Guide

April 2013     169

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments