manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 90 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 90

3. Apply your changes.

>> Certificate 1#

apply

Changes applied successfully.

4. Save the CSR to a file.

Copy the entire CSR, including the

"-----BEGIN CERTIFICATE REQUEST----- " and "-----END CERTIFICATE 

REQUEST----- "

lines, and paste it into a text editor. Save the file with a .csr extension. The name

you define can indicate the server on which the certificate is to be used.

5. Save the private key to a file.

 Note:

Provided you intend to use the same certificate number when adding the

certificate returned to you (after the CSR has been processed by a certificate

authority), this step is only necessary if you want to create a backup copy of the

private key. When generating a CSR, the private key is created and stored

(encrypted) on the VPN Gateway using the specified certificate number. When

you receive the certificate (containing the corresponding public key) and add it

to the VPN Gateway, make sure you specify the same certificate number that is

Certificates and Client Authentication

90     User Guide

April 2013

Comments? [email protected]

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments