manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 187 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 187

The IP address pool is empty and a login attempt was rejected due to not being able to
allocate an IP address from the pool. Note that Net Direct clients also use IPs from the
IP pool.

NOTICE

• Failed to decode client cert

A client sent a bad client certificate which could not decoded/parsed.

• Bad clicert, Can't find issuer in clicert

A client sent a bad client certificate which did not contain an issuer.

• Error while decoding certificate DER Id

A client sent a certificate where the X509 Name portion could not be extracted from the
certificate.

• Client cert %d revoked

The client certificate with serial number %d was revoked and thus login failed.

• Ike not started due: No license

If no licence can be found (such as on old ASA 310), IKE is not started.

INFO

• Using new IKE. IKE Profile %s received in Auth Reply.

Received new IKE profile from AAA (received from RADIUS).

• ISAKMP SA Established with %s

ISAKMP SA Established.

• IPsec SA Established with %s, IPComp %s, inbound CPI 0x%x

IPsec SA Established.

• Closing earlier opened UDP Encap Socket for port : %d

UDP Encap port number changed.

• Creating UDP Encap Socket for %d.%d.%d.%d/%d

UDP Encap port number changed.

• Received Delete ISAKMP SA message from %s

Received Delete ISAKMP SA message.

• Received Delete IPSEC SA message from %s

List of Syslog Messages

User Guide

April 2013     187

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments