manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 56 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 56

Setup successful.

login:

The setup is now finished. The VPN Gateway that has been joined to the cluster
will automatically pick up all configuration data from one of the already installed
AVG(s) in the cluster. After a short while you will get a login prompt.

If needed, you can now continue with the configuration of the AVG cluster using the
Command Line Interface (CLI) or the Browser-Based Management Interface (BBI).
Log in as the admin user.

For more information about the CLI, see 

The Command Line Interface

 on

page 123.

For more information about the BBI, see the 

Avaya SSL VPN BBI Quick Guide

.

Installing an ASA 310-FIPS

The ASA 310-FIPS model is an ASA 310 where the ordinary SSL accelerator card has been

replaced by the HSM (Hardware Security Module) SSL accelerator card. For more information

about the ASA 310-FIPS model, see 

Introducing the ASA 310-FIPS

 on page 31.

After having installed the first ASA 310-FIPS, additional ASA 310-FIPS units can be added to

the same cluster by specifying the Management IP (MIP) address that identifies the cluster.

For more information about adding an ASA 310-FIPS to an existing cluster, see 

Adding an

ASA 310-FIPS to an Existing Cluster

 on page 61.

Before installing or adding an ASA 310-FIPS, make sure that you have fully understood the

concept of iKeys. You might also want to decide the labeling scheme you want to use for

identifying which iKey is used to initialize a certain HSM card, and also label two of the black

cluster-specific iKeys "CODE-SO" and "CODE-USER" respectively in advance. For more

information about the concept of iKeys and the ASA 310-FIPS ASA 310-FIPS model in general,

see 

Introducing the ASA 310-FIPS

 on page 31. You should also decide a password scheme

because you will define passwords not only for the 

admin

 user, but also for the HSM-SO iKeys,

the HSM-USER iKeys, and possibly a secret passphrase (when selecting FIPS mode).

Installing an ASA 310-FIPS in a New Cluster

When you log in as the admin user after having started the ASA 310-FIPS the first time, the
Setup menu is displayed.

1. Choose 

new

 from the Setup menu to install the ASA 310-FIPS as the first member

in a new cluster.

Initial Setup

56     User Guide

April 2013

Comments? [email protected]

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments