Avaya 3050-VM User Manual Download

Page: 179 / 274

Socks request of version <version> received and rejected. Most likely a non-standard
socks client.

• Failed to log to CLI:<reason> -- disabling CLI log

Failed to send troubleshooting log to CLI. Disabling CLI troubleshooting log.

• Can't bind to local address: <ip>:<port>: <reason>

Problem encountered when trying to set up virtual server on <ip>:<port>.

• Ignoring DNS packet was not from any of the defined namesserver <ip>:<port>

AVG received reply for non-configured DNS server.

• Proxy connect host name too long: <host>

The host name is too long to perform proxy connect. Make the host name shorter or
remove the domain from the proxy connect mapping.

• Certificate CRL handling errors:

- failed to start auto-crl handling

- <Cert#>: syntax error when parsing the CRL-URL

- <Cert#>: automatic retrieval of HTTP-CRL failed - lookup failure <Host>

- <Cert#>: automatic retrieval of HTTP-CRL failed - parse error

- <Cert#>: auto-crl over HTTP failed, reason: <Reason>

- <Cert#>: automatic retrieval of HTTP-CRL failed

- <Cert#>: failed to create TFTP-CRL temp file

- <Cert#>: parsing of TPFP-CRL URL failed

- <Cert#>: automatic retrieval of TFTP-CRL failed - lookup failure <Host>

- <Cert#>: failed to read TFTP-CRL temp file

- <Cert#>: automatic retrieval of TFTP-CRL failed

- <Cert#>: automatic retrieval of LDAP-CRL failed - lookup failure <Host>

- <Cert#>: failed to contact LDAP server at <Host>

- <Cert#>: no CRL (1) found at LDAP server

- <Cert#>: CRL authentication failed

- <Cert#>: no CRL (2) found at LDAP server

- <Cert#>: no CRL (3) found at LDAP server

- <Cert#>: no CRL passwd found

- <Cert#>: no CRL filter was found

- <Cert#>: no CRL interval found for cert

List of Syslog Messages

User Guide

April 2013 179

Summary of Contents for 3050-VM



















































































































































































































































































Search results

Summary of Contents for 3050-VM

Reviews:

Related manuals for 3050-VM

Brands by name

Popular brands

Avaya 3050-VM, User Manual

Search results

Summary of Contents for 3050-VM

Reviews:

Related manuals for 3050-VM

Brands by name

Popular brands