manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 135 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 135

1: 192.168.128.78, 255.255.255.0

Add Interface 1 IP Addresses and MIP to Access List

Use the 

/cfg/sys/cluster/cur

 command to view the Host Interface 1 IP address for the

existing VPN Gateway. Then add this IP address, the intranet IP address you had in mind for
the new VPN Gateway and the Management IP address (MIP) to the Access list.

To add the IP addresses to the Access list, type the command 

/cfg/sys/accesslist/

add

.

>> #

/cfg/sys/accesslist/add

Enter network address:

<IP address>

Enter netmask:

<network mask>

Try adding the VPN Gateway to the cluster using the 

join

 command in the Setup menu.

If a software version earlier than 2.0.11.16 is running in the cluster, and software version 3.1
or later is installed on the VPN Gateway you want to join, perform the steps described in 

Reinstalling the Software

 on page 66. If there is still a difference in software version after this,

you need to adjust the software version on the VPN Gateway you want to add as well. After
having upgraded the software version in the cluster, log in to the VPN Gateway you want to
add as the Administrator user and select 

join

 from the Setup menu.

The AVG Stops Responding

Telnet or SSH Connection to the Management IP Address

When you are connected to a cluster of VPN Gateways through a Telnet or SSH connection
to the Management IP address, your connection to the cluster can be maintained as long as
at least one master VPN Gateway in the cluster is up and running. However, if the particular
VPN Gateway that currently is in control of the Management IP stops responding while you
are connected, you need to close down your Telnet or SSH connection and reconnect to the
Management IP address.

After doing so, you can view the operational status of all VPN Gateways in the cluster by typing
the command 

/info/isdlist

. If you find that one of the AVG's operational status is indicated

as, you should reboot that machine. On the VPN Gateway, press the Power button on the back

The AVG Stops Responding

User Guide

April 2013     135

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments