manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 207 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 207

Message

Severity

Type

Explanation

the cluster is up
and running.

slave_not_startin
g

ALARM (WARNING)

System Control

The portal
handling
subsystem cannot
be started.

socks error:
<reason>

ERROR

Traffic Processing

Error encountered
when parsing the
socks traffic from
the client.
Probably a non-
standard socks
client.

SOCKS Rejected
Vpn="<id>"
User="<user>"
SrcIP="<ip>"
Request="<reque
st>"

INFO

AAA

The remote user
failed to perform
an operation by
using one of the
features available
under the Portal's
Advanced tab.

socks request:
socks version
<version>
rejected

ERROR

Traffic Processing

Socks request of
version <version>
received and
rejected. Most
likely a non-
standard socks
client.

INFO

AAA

The remote user
has successfully
performed an
operation by using
one of the
features available
under the Portal's
Advanced tab.

software_configur
ation_changed

EVENT

System Control

Indicates that
release <VSN>
(version) has
been <Status>
(unpacked/
installed/
permanent).

software_release
_copying

EVENT

System Control

Indicates that
<IP> is copying
the release

Syslog Messages in Alphabetical Order

User Guide

April 2013     207

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments