Avaya 3050-VM User Manual Download Page 201

Page: 201 / 274

Message

Severity

Type

Explanation

within 7 days.
Check loaded
licenses using
the

/cfg/sys/

cur

command.

license_expire_s
oon

EVENT

System Control

Indicates that the
loaded (demo)
license at the <IP>
VPN Gateway
expires within 7
days.

license_expired

EVENT

System Control

Indicates that the
the demo license
at host <IP> has
expired. Check
the loaded
licenses
with

/cfg/sys/

cur

License expired

WARNING

Traffic Processing

The loaded
(demo) license on
the VPN Gateway
has expired. The
VPN Gateway
now uses the
default license.

Loaded
<ip>:<port>

INFO

Startup

Initializing virtual
server
<ip>:<port>.

Loaded ca
certificate %s

INFO

IPsec

Loaded CA
certificate with
name %s. This
certificate is used
to verify client
certificates.

Loaded server
cert %s

INFO

IPsec

Loaded server
certificate with
name %s. This
certificate must be
signed by a
trusted CA in the
client.

Log off notif for
non-existing
session id %u

WARNING

IPsec

AAA notified
about log-off for a

Syslog Messages in Alphabetical Order

User Guide

April 2013 201

Summary of Contents for 3050-VM



















































































































































































































































































Search results

Summary of Contents for 3050-VM

Reviews:

Avaya 3050-VM, User Manual, Page: 201 / 274

Search results

Summary of Contents for 3050-VM

Reviews: