Avaya 3050-VM User Manual Download Page 81

Page: 81 / 274

list

- List all users

del

- Delete a user

add

- Add a new user

edit

- Edit a user

caphrase

- Certadmin export
passphrase

3. Assign the admin user certadmin user rights by adding the admin user to the

certadmin group.

>> User#

edit admin

>> User admin#

groups/add

Enter group name:

certadmin

Note:

A user must be assigned to at least one group at any given time. If you want to

replace a user's single group assignment, you must therefore always first add the

user to the desired new group, then remove the user from the old group.

4. Verify and apply the changes.

>> Groups#

list

Old:

1: tunnelguard

2: admin

3: oper

Pending:

1: tunnelguard

2: admin

3: oper

4: certadmin
>> Groups#

apply

Changing a Users Group Assignment

User Guide

April 2013 81

Summary of Contents for 3050-VM



















































































































































































































































































Search results

Summary of Contents for 3050-VM

Reviews:

Avaya 3050-VM, User Manual, Page: 81 / 274

Search results

Summary of Contents for 3050-VM

Reviews: