manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 245 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 245

Appendix H: Adding User Preferences

Attribute to Active Directory

For the remote user to be able to store user preferences on the Avaya VPN Gateway (AVG), you need to

add the 

isdUserPrefs

 attribute to Active Directory. This attribute will contain an opaque data structure,

containing various information that the user may have saved during a Portal session.

This description is based on Windows 2000 Server and Windows Server 2003. Make sure that your

account is a member of the Schema Administrators group.

Install All Administrative Tools (Windows 2000 Server)

1. Open the Control Panel and double-click 

Add/Remove Programs

.

2. Select 

Windows 2000 Administrative Tools

 and click 

Change

.

3. Click 

Next

 and select 

Install All Administrative Tools

.

4. Follow the instructions on how to proceed with the installation.

Register the Schema Management dll (Windows Server
2003)

1. Click 

Start

 and select 

Run

.

2. In the 

Open

 field, enter 

regsvr32 schmmgmt.dll.

Note that there is a space between regsvr32 and schmmgmt.dll.

3. Click 

OK

.

This command will register schmmgmt.dll on your computer.

User Guide

April 2013     245

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments