Avaya 3050-VM, User Manual, Page: 155 / 274

To check if the VPN Gateway(s) is getting network traffic, type the following command:
>> #
/stats/dump
The screen output provides information about currently active request sessions, total
completed request sessions, as well as SSL statistics for configured virtual SSL servers.
To check statistics for the local Ethernet network interface card, type the following command:
>> #
/info/ethernet
The screen output provides information about the total number of received and transmitted
packets, the number of errors when receiving and transmitting packets, as well as the type of
error such as dropped packets, overrun packets, malformed packets, packet collisions, and
lack of carrier.
To check if a virtual server (on the Application Switch) is working, type the following command
at any menu prompt:
>> #
ping
<IP address of virtual server>
To capture and analyze TCP traffic sent from a virtual SSL server to the backend server, type
the following command (where you replace "#" with the index number of the desired virtual
SSL server):
>> #
/cfg/ssl/server #/trace/tcpdump
To capture and analyze decrypted SSL traffic sent between a client and a virtual SSL server,
type the following command (where you replace "#" with the index number of the desired virtual
SSL server):
>> #
/cfg/ssl/server #/trace/ssldump
Active Alarms and the Events Log File
To view an alarm that has been triggered and is active, type the following command:
>> #
/info/events/alarms
System Diagnostics
User Guide April 2013 155