manualshive.com logo in svg

Avaya 3050-VM, User Manual, Page: 132 / 274

Share
Download
Avaya 3050-VM User Manual Download Page 132

>> #

/cfg/sys/adm/cur

 Collecting data, please wait...

Administrative Applications:

CLI idle timeout = 1h

Telnet CLI access = off

SSH CLI access = off

Enable Telnet or SSH Access

If your security policy affords enabling remote connections to the VPN Gateway, type the
command 

/cfg/sys/adm/telnet

 to enable Telnet access, or the

command 

/cfg/sys/adm/ssh

 to enable SSH access. Apply your configuration changes.

>> #

/cfg/sys/adm/ssh

Current value: off
Allow SSH CLI access (on/off):

on

>> Administrative Applications#

apply

Changes applied successfully.

Check the Access List

If you find that Telnet or SSH access is enabled but you still can't connect to the VPN Gateway
using a Telnet or SSH client, check whether any hosts have been added to the Access List.
Type the command 

/cfg/sys/accesslist/list

 to view the current Access List.

>> #

/cfg/sys/accesslist/list

1: 192.168.128.78, 255.255.255.0

When Telnet or SSH access is enabled, only those hosts listed in the Access List are allowed
to access the VPN Gateway over the network. If no hosts have been added to the Access List,
this means that any host is allowed to access the VPN Gateway over the network (assuming
that Telnet or SSH access is enabled).

Check the IP Address Configuration

If your host is allowed to access the VPN Gateway over the network according to the Access
List, check that you have configured the correct IP addresses on the VPN Gateway. Make sure
you ping the host IP address of the VPN Gateway, and not the Management IP (MIP) of the

Troubleshooting the AVG

132     User Guide

April 2013

Comments? [email protected]

Summary of Contents for 3050-VM



















































































































































































































































































Reviews:

No comments